Lumens PC193 - Chapter 7 Descriptions of Major Functions; I Would Like to Automatically Adjust the Image to Have the Best Brightness and Focusing Performance; I Would Like to Switch Image Sources; I Would Like to Switch the Image Mode

English - 25
Chapter 7 Descriptions of Major Functions
7.1 I would like to automatically adjust the image to have
the best brightness and focusing performance
Use the remote control or control panel:
1. Press [AUTO TUNE] for the best brightness and focusing performance.
7.2 I would like to switch image sources
Live image is the default image source. Press [SOURCE] on the
remote control or control panel to have PC193 switch among the
following images sources:
1. Live images (default).
2. VGA IN / HDMI IN.
<Remark> This image switch applies to VGA OUT/HDMI OUT
simultaneously.
7.3 I would like to switch the image mode
Use the remote control or control panel:
1 Press [MENU] to activate the setting menu.
2 Press [], [], [], or [] to select [Image mode].
3 Press [] or [] to the [Normal/Film/Slide/Microscope].
7.4 I would like to make text clearer and photos more
colorful
7.4.1 Photo/Text mode descriptions
The default [Photo/Text] mode is in Photo (Photo mode). To change this
setting, please use the remote control or the control panel to activate the
options of the setting menu.
 [Photo] (default): for viewing photos or text with photos, making photos
more colorful.
 [Text]: for viewing text files, making the text clearer.
 [Gray]: for viewing black & white photos which will make the grayscale
differentiation distinct.
7.4.2 Set up Photo/Text mode
To change the settings, please use the remote control or the control panel: