Lust SMARTDRIVE VF1205M - MOP Function with S1 IND;S2 IND

2-14
2.4.5 MOP function with S1IND/S2IND
Definitions
Base value preset analog speed reference at FSIN input
Offset Ratio of elevation or lowering from base value,
influenced by inputs S1IND and S2IND
S1IND Input of offset setting for reference increase
S2IND Input of offset setting for reference decrease
Reference input, which is raised or lowered by the ratio of the offset
(Base value +/- Offset)
04-FSSEL = > 17 18 19 20 21 22
Reset offset with x x x
S1IND = 1, S2IND = 1
Reset offset with x x
braking ramp RSTOP
Retain offset when x x
power off (EEPROM memory)
Explanation of diagrams in examples:
Input active
Input inactive
Braking ramp with counter-clockwise rotation
Braking ramp with clockwise rotation
Acceleration ramp with clockwise rotation
Acceleration ramp with counter-clockwise rotation
Braking ramp (Param. 36-RSTOP)
RDEC1
RDEC1
RACC1
RACC1
RSTOP
stop
return
start
enter