Luxor ZD - Language; Location

12
Operating the Luxor
®
ZD/ZDC
Language
In the SETUP screen, select the language eld by pressing the scroll
wheel and turning it to the desired language. Press the scroll wheel
again to nalize the selection.
• The language change will not take eect until either the HELP
or the HOME buttons are pressed.
Location
The LOCATION menu is designed to graphically represent a Luxor’s
location on a map for accurate Sunrise and Sunset times based on the
current date, time zone, and longitude/latitude settings.
First, set the time zone in the SETUP screen. While still in the SETUP
screen, enter the LOCATION screen to adjust longitude and latitude
coordinates.
• The full screen crosshairs designate the user’s location on
the map.
• Latitude is rst adjusted by rotating the scroll wheel to move the
crosshair up and down. Numeric indicators at the top right display
the actual coordinate. Press the scroll wheel to select the Latitude;
it is set by pressing the click-wheel.
• Longitude is next adjusted by rotating the scroll wheel to move the
crosshairs le and right.
• The coordinate settings are automatically saved aer each press
of the scroll wheel. Select the HOME button to leave the
LOCATION screen.
• Reset or adjustment is initiated by pressing the scroll wheel and
then repeating the above Latitude and Longitude steps.
Figure 5: Location Map of US