13
Operating the Luxor
®
ZD/ZDC
Additional Countries
The USA map is the default country. To view additional countries,
do one of the following:
• In the picture below, the Canadian map appears when the
crosshairs reach the upward edge of the screen. To return to the
map of the USA, move the crosshairs to the bottom of the screen.
Only the USA and Canada maps are available for transformers
shipped for 110V.
• For international versions (230V), select the desired region in the
SETUP menu to view the appropriate map.
Figure 6: Location Map of Canada
Assign
When compatible xtures are plugged into the xture programming
ports, the assign screen will automatically display. The ASSIGN screen
is also accessible under the SETUP menu.
Network
The Wi-Fi or Ethernet tab will appear instead of “network” when the FX
Wi-Fi module or FX LAN module is inserted into the accessory port in
the back of the facepack. On ZDC systems the Wi-Fi tab is displayed in
place of the network tab. For more information on using the Wi-Fi, refer
to the separate owner’s manual for Luxor Wi-Fi.
Restrict
The restrict function prevents changes to themes.
From the HOME screen, navigate to the SETUP and then RESTRICT
screens using the scroll wheel.
Select the box next to “Prevent the user changing themes.”
To remove the restriction, follow the same steps to restrict, but click
the box next to “Allow themes to be changed…”
To Next Page
Loading...