Luxor ZD - Using Other Devices and Shutdown

22
Operating the Luxor
®
ZD/ZDC
Using Other Devices with the Luxor
The Luxor can communicate with devices other than FX integrated
LED boards. Two of those devices include the Luxor CUBE and the
Luxor ZD MR-16.
CUBE
The Luxor CUBE allows the Luxor ZD and ZDC to control, zone, and
dim lighting xtures and other devices that don’t have built-in FX ZD
technology. Install the CUBE in-line prior to the xtures or devices
you wish to control as a zone. When that zone is activated by the
Luxor, all xtures or devices in-line aer the CUBE will initiate and
dim according to the commands of the Luxor.
The cube is oered in three models to ensure maximum exibility:
• Low Voltage Lighting (LCM-LV)
• Line Voltage Lighting (LCM-HV)
• Relay and 0-10V Dimming (LCM-RLY-010V)
ZD MR-16
The ZD MR-16 is a convenient high-quality LED replacement lamp
that converts incandescent xtures to energy-ecient LED xtures.
When connected to a Luxor ZD transformer, the ZD MR-16 adds
zoning, dimming, and control capabilities to any brand of low voltage
landscape lighting xture utilizing an MR-16 socket.