Version 2.06 February 2017
Page 30 of 44
5.7.8 Files
Airspace and waypoints files can be selected here. The NANO
3
supports CUP file format
for waypoints and CUB file format for airspace. There is no limitation in file size or number
of waypoints, but reducing the size of the airspace area or number of waypoints,
performance of the NANO
3
will be better.
In the same section you can convert all IGC files loaded on the NANO
3
to KML file format.
FlarmNet data can be loaded also in this section and is useful only if flarm is connected to
NANO
3
5.7.9 Units
In this menu can be set the units for speeds, distances, altitudes…
5.7.10 Logbook
All flights recorded by the NANO
3
are stored and sorted by date here. The user can find date,
take-off and landing time and duration of the flight. Use the two middle buttons to navigate
through the list. Long press of these buttons will get you faster to the first or last flight
recorded.
To Next Page
Loading...
