40
Store
Press this key to save the current assignments to one of 12 presets. This will overwrite the
preset currently stored there. See Presets and Memory > Storing Presets to learn more
about this.
Curve / Mackie
®
/HUI
®
Press this key to set the velocity curve of the keyboard, pads, encoders, or X-Y pad (when
set to Note Mode). To learn how to set the velocity curve for each control, see one of the
sections below:
Keyboard > Editing Assignments > Curve
Pads > Editing Assignments > Curve
Encoders > Editing Assignments > Curve
X-Y Pad > Editing Assignments > Curve
Press and hold Shift and then press this key to switch the current preset between Mackie
Control Mode and HUI Mode. While in each mode, any control that is set to that mode will
send out send messages using that protocol. See Mackie Control and HUI to learn more
about this.
Numeric Keys (0–9)
Use the keyboard’s numeric keys (0–9) to enter values, which will appear in the display.
Enter
Press this key to confirm a command or selection (not every command or selection requires
you to press this key, though).
To Next Page
Loading...
Need help?
General
