46
Modes
The faders are always in one of two modes. Press Fader Mode to switch between them,
distinguishable by the Fader Mode button’s color.
MIDI Mode
In this mode, the Fader Mode button will be lit red.
Moving the faders will send MIDI CC messages, which you can assign (described earlier in
Editing Assignments > Message).
Mackie Control/HUI Mode
In this mode, the Fader Mode button will be lit green.
If your Code Series keyboard is set to use the Mackie Control protocol, moving the faders
will adjust the volume of each track.
If your Code Series keyboard is set to use the HUI protocol, moving the faders will adjust the
volume of each track except for the master fader (F1), which will be in MIDI Mode.
Use the Bank Right/Left () buttons to move to another bank of tracks.
To select the Mackie Control or HUI protocol, see Mackie Control and HUI.
Important note if you are using Code 25: In your DAW, it may look like you are controlling 8
tracks, but you can control only 4 tracks at a time. When you press one of the Bank
Right/Left () buttons, you will control only the next/previous 4 tracks.
To Next Page
Loading...
Need help?
General
