MacDon M100 2009 - 5 OPERATOR’S STATION (continued); 5.15 ENGINE CONTROLS;GAUGES

OPERATOR’S STATION
Form 169304 25 Model Year - 2009
5.15 ENGINE CONTROLS/GAUGES
All engine controls are conveniently located on
the operator’s console. Refer to the following
illustration for the location and a description of
each.
THROTTLE
Controls Engine RPM.
FULL – Push Lever Forward
OPERATING – See Section 6.3.5
IDLE
– Pull Lever Back
IGNITION SWITCH
ACC – Fully Counter-Clockwise
OFF – All Electrical Systems Off
RUN – Clockwise
START– Fully Clockwise To Crank Engine
Release and Switch Returns to RUN
REMOVE KEY WHEN WINDROWER NOT IN USE.
KEY ALSO LOCKS DOORS.
FULL
IDLE