MacDon M100 2009 - Auger Speed

HEADER OPERATION – A SERIES
Form # 169304 86 Model Year - 2009
6.6.3 Auger Speed
6.6.3.1 A30-S and A30-D Headers
On A30 Series auger headers, the auger speed
is fixed to the reel speed.
NOTE
The auger speed can be independently
changed from the reel speed by changing
the drive sprocket. Refer to A30-S, A30-D
& A40-D Self Propelled Windrower
Headers OPERATOR’S MANUAL.
Display the auger speed as follows:
CAUTION
Check to be sure all bystanders have cleared
the area.
6.6.3.2 A40-D Headers
On A40-D double knife headers, an optional 30
tooth sprocket can be installed to change the
reel speed independently of the auger speed.
CAUTION
Check to be sure all bystanders have cleared
the area.
ENGAGE HEADER
HEADER INDEX
SWITCH - OFF
ON GSL PRESS SELECTOR BUTTON
OR SELECT SWITCH ON CDM FOR
##.# AUGER SPEED
##.# = 00.0 – 99.0
00.0 = 150 rpm
* 99.0 = 320 rpm
* Auger Speed Not To Exceed 320 rpm.
ENGAGE HEADER
ON CDM PRESS
FAST OR SLOW
DISPLAY SHOWS
##.# AUGER SPEED
DONE
SPEED
O.K.?
NO
YES
PRESS DISPLAY SELECTOR
FOR ##.# AUGER SPEED
HEADER INDEX
SWITCH - OFF
##.# = 00.0 – 99.0
00.0 = 150 rpm
* 99.0 = 320 rpm
* Auger Speed Not To Exceed 320 rpm.
DISPLAY
HEADER INDEX
DISPLAY
SELECTOR
DISPLAY
SELECTOR
DISPLAY
HEADER INDEX
FAST
SLOW