WINDROWER TRACTOR OPERATION
Form 169304 59 Model Year - 2009
b. Turn LIGHT switch to ROAD position to activate
lamps.
c. Activate the BEACON where applicable.
WARNING
Always use these lamps on roads to provide
warning to other vehicles. Do not use field
lamps on roads, other drivers may be
confused by them.
d. Push ground speed range switch (A) for road
speed. CDM will display ROAD GEAR at (B),
and LED over 2 will light up.
e. Slowly push throttle (C) to full forward (operating
rpm). CDM should display 2600-2650 at (D).
f. Slowly move the GSL (E) forward to desired
ground speed which will be displayed also at
(D).
LED ON 2
To Next Page
Loading...
