MAINTENANCE WORK
COOLING SYSTEM
Maintenance manual T225/T230 59
If the temperature of the coolant is still too high, inspect the
rear side of the charge air cooler, water cooler and
transmission oil cooler and clean any soiling there.
Fig. 31: Cooler block
X
Tilt the driver's cab, see “Tilting driver's cab” on page 44.
X Blow compressed air (4 bar max.) from behind through the
cooler block.
If the temperature of the coolant is still too high after
maintenance, remove the cooler block and take it
apart.
To Next Page
Loading...
