© Copyright Mahindra & Mahindra Ltd. 012016
2-7
the rating of the circuit/fuse, it blows off. The element in the fuse
melts, opening the circuit and preventing other components of the
circuit from being damaged by the over current. The size of the
metal fuse element determines the rating. Once a fuse blows off, it
must be replaced with a new one.
Switch the ignition and all electrical equipment OFF before touching
or attempting to change a fuse.
Replacement fuse must be with the same rating as the one you
have removed.
You can identify a blown fuse by a break in the filament. All
fuses except high current fuses are press fit.
Never touch fuses with bare hands. Always use a fuse puller to
remove and refit the fuses. The fuse puller is available in the IP
fuse box.
Be careful while removing the relay, do not shake or apply
excessive force to avoid damage to relay terminal.
Three fuse boxes in the vehicle;
• Battery Mounted Fuse Box
• Engine Compartment Fuse Box
• Instrument Panel Fuse Box
GENERAL
To Next Page
Loading...
