Mahindra ML170 series - 13 Optional Pin on Quick Attach System; Recommended Loader Factory Approved Attachments; Pin on Quick Attach

54
13. OPTIONAL PIN ON QUICK ATTACH SYSTEM
IMPORTANT: Read safety information in this section and on decal before operating attachment.
NOTE: Pin On Quick Attach System is optional equipment
WARNING: Always read and follow operating instructions before operating Pin On Quick Attach
System.
13.1. RECOMMENDED LOADER FACTORY APPROVED ATTACHMENTS
IMPORTANT: Use only Loader Factory Approved Attachments for mounting on this Pin On Quick Attach
System.
13.2. PIN ON QUICK ATTACH
WARNING: Always read and follow operating instructions before operating Pin On Quick Attach
System.
13.2.1. Install pin on quick attach direct to
loader. Secure using pins and e-clips.
Top Pin
1-1/8" x 7.01"
and E-Clip,
1 place each side.
Bottom Pin
1-1/8" x 7.01"
and E-Clip,
1 place each side.