Mahindra ML170 series - 21 Skid Steer Bucket; Installation Instructions to Skid Steer Tool Carrier

68
21. SKID STEER BUCKET
IMPORTANT: Read safety information in this section and on decals before operating attachments.
WARNING: To avoid serious injury or death from large round or square hay bale handling:
•
Use only Factory bale spear or bale retaining device handler attachment when handling round
bales.
•
Do not handle large square bales without a retaining device handler attachment
•
Do not use buckets, forks, or other attachments without bale retaining devices.
•
Do not use loader for handling large, heavy objects such as logs, tanks, etc.
WARNING: To avoid serious injury or death, realize handling large heavy objects can be extremely
dangerous due to:
•
Danger of rolling the tractor over.
•
Danger of upending the tractor.
•
Danger of the object rolling or sliding down the loader arms onto the operator.
WARNING: To avoid serious injury or death:
•
Do not lift or carry anyone on buckets, forks, probes, or any other portion of the loader or
loader attachments.
•
Avoid contact with electrical power lines by loader or attachment
WARNING: Inadvertent movement of the loader or attachment could result in serious injury or
death.
21.1. SKID STEER BUCKET
21.2. INSTALLATION INSTRUCTIONS TO SKID STEER TOOL CARRIER
IMPORTANT: Refer to Pages 64 to 66 for instructions concerning Installing Attachment to Skid Steer Tool
Carrier.
IMPORTANT: Refer to Page 67 for instructions concerning Removing Attachment from Skid Steer Tool
Carrier.