Mahindra ML170 series - 16 Service and Lubrication for Pin on Quick Attach; Keep These Areas Clean; Lubricate Annually

59
16. SERVICE AND LUBRICATION FOR PIN ON QUICK ATTACH
16.1. KEEP THESE AREAS CLEAN
16.1.1. Keep these areas clean to allow pin on quick
attach system to function properly.
IMPORTANT: To maintain your Pin On Quick
Attach System functioning properly, always
inspect Pin On Quick Attach System components
for damage or wear. If damage or wear exists,
replace components immediately.
16.2. LUBRICATE ANNUALLY
16.2.1. Lubricate Quick Attach Pins annually using a
good grade of grease. Remove front covers of quick
attach by loosing 3/8" nut and then removing sealant
and cover plate. Grease components and pin and
then reinstall cover plate and seal using Sika-Flex
Sealant.
Lubricate these areas of Pin On Quick Attach.
Cover Plate shown removed.
Lubricate these areas of Pin On Quick Attach.