8
DANGER, WARNING, AND CAUTION
DECAL SAFETY MESSAGES
0595-3000 WARNING DECAL
1. Add recommended rear wheel ballast and/or rear counter-weight for stability.
2. Move wheels to widest recommended setting to increase stability.
3. Move and turn tractor at low speeds.
4. In transport carry the load low.
5. Lower loader to the ground when parked.
6. Before servicing or adjusting equipment:
* lower loader to the ground.
* shut off engine.
7. Relieve hydraulic pressure before disconnecting oil lines.
8. Observe safety recommendations in Loader Operations Manual.
0595-3001 WARNING DECAL
Crushing Hazard
9. Stay away from under lift arms and bucket!
10. Do not stand or work under a raised loader.
11. Support bucket and lift arms before working under loader.
12. Lower loader to the ground before leaving seat.
0595-3002 DANGER DECAL
13. Keep machine clear of overhead power lines to avoid death or serious injury.
0595-3003 WARNING DECAL
14. To prevent rollback onto operator use special loader attachments for handling large objects such as stumps
and large round bales.
15. Transport load as low as possible to avoid overturning.
0595-3004 WARNING DECAL
16. Read the operator’s manual for complete operating instructions and safety information before operating the
loader.
17. Be certain anyone operating the loader is aware of safe operating practices and potential hazards.
18. Operate the loader from the operator’s seat only.
19. Do not lift or carry anyone on loader or work from bucket or attachment.
20. Do not walk or work under raised loader or bucket or attachment unless it is securely supported.
21. Avoid loose fill, rocks, and holes; they can be dangerous for loader operation or, movement.
22. Use extra caution when working on inclines.
23. Avoid overhead powerlines or obstacles when loader is raised.
To Next Page
Loading...
Need help?
General