To Next PageTo Next Page
Need help?Do you have a question about the Makeblock Ultimate 2.0 and is the answer not in the manual?
General| Battery type | AA |
|---|---|
| Battery voltage | 1.5 V |
| Power source type | Non-rechargeable battery |
| Batteries required | Yes |
| Number of batteries supported | 6 |
| Material | Aluminium, Plastic, Steel |
| Applications | Graphical, Arduino , Python, Node JS |
| Product type | Programmable building set |
| Certification | CE |
| Product color | Black |
| Recommended age (min) | - yr(s) |
| Number of sensors | 3 |
| Cables included | LAN (RJ-45), USB |
| Batteries included | No |
| EU TSD warning | Not for children under 36 months, To be used under direct adult supervision |
Weight and Dimensions| Depth | 63 mm |
|---|---|
| Width | 85 mm |
| Package type | Box |
Guide on connecting Makeblock robots to mBlock software for programming and control.
Step-by-step instructions for updating robot firmware using the mBlock software.
Procedure to reset the robot's default program using mBlock software.
Instructions for transferring custom programs to Makeblock robots using mBlock.
Explains the differences between upgrading robot firmware and resetting default programs.
Troubleshooting steps for Makeblock robots that do not move at low motor speed settings.
Comparison of Bluetooth, 2.4G wireless, and USB connection methods for Makeblock robots.
Steps to resolve connection problems between Makeblock robots and the mobile application.
Guide on how to replace the motor shaft for the mBot robot.
Troubleshooting steps for the ultrasonic sensor in mBot's obstacle avoidance mode.
Diagnosing and resolving issues with the line follower mode on the mBot robot.
Instructions for establishing a 2.4G wireless connection for the mBot.
Guide on how to modify the speed of the mBot using its IR remote controller.
Details the operational voltage range and charging protection for the mCore.
Provides specifications for the mCore battery holder and its cover.
Recommendations for suitable Li-po batteries for the mBot v1.1.
Identifies common symptoms indicating the robot is not receiving enough battery power.
Links to download instructional materials and guides for the mBot robot.
Collection of video tutorials covering mBot operations and features.
Links to advanced projects and extensions for enhancing mBot functionality.
Guide for programming mBot using Swift language on iOS devices.
Resources and guidance for using Python to program mBot.
Information on using Makeblock products with various programming languages.
Additional methods and resources for programming the mBot robot.
Troubleshooting steps for when Ranger robot motors are not working properly.
Information on whether a 2.4G wireless module can be used with the Ranger robot.
Troubleshooting guide for the Ranger's object avoidance mode not functioning.
Steps to resolve balancing problems experienced by the Nervous Bird robot.
Lists the mobile applications compatible with the Ranger robot.
Guide to establishing a Bluetooth connection between Ranger and the Makeblock App.
Troubleshooting steps for when the Ranger's Bluetooth signal cannot be detected.
Explains Bluetooth compatibility limitations for older iPad models.
Troubleshooting steps for unstable Bluetooth connections with the Ranger robot.
Troubleshooting steps for when the Starter robot's motors are not working properly.
Compares the features and differences between the Starter IR and Bluetooth versions.
Guide on how to operate the Starter robot using its IR remote controller.
Information on replacing the Starter's Bluetooth module with a 2.4G module.
Lists the mobile applications compatible with the Starter robot.
Guide to establishing a Bluetooth connection between Starter and the Makeblock App.
Steps to resolve Bluetooth connection issues between Starter and the Makeblock App.
Details the working voltage range and output voltage for Starter/Orion boards.
Instructions and recommendations for powering the Starter robot.
Guide on programming the Robotic Arm add-on for the Starter robot.
Troubleshooting for non-functional motors on the Ultimate 2.0 robot.
Comprehensive guide to Bluetooth connectivity for Ultimate 2.0 on mobile devices.
Lists the mobile applications compatible with the Ultimate 2.0 robot.
Guide to establishing a Bluetooth connection between Ultimate 2.0 and the Makeblock App.
Troubleshooting steps for detecting the Ultimate 2.0's Bluetooth signal.
Explains Bluetooth compatibility limitations for older iPad models.
Troubleshooting steps for unstable Bluetooth connections with the Ultimate 2.0 robot.
Information on using a 2.4G wireless module to control the Ultimate 2.0 robot.
Steps to resolve balancing problems with the Ultimate 2.0 self-balancing robot.
Details the working voltage range and output voltage for Ultimate 2.0/MegaPi boards.
Instructions and recommendations for powering the Ultimate 2.0 robot.
Guide to testing the wire connections for the X and Y axes on the LaserBot.
Procedure to test the LaserBot's laser module to determine if it is faulty.
Troubleshooting for LaserBot's axis movements that do not stop at limits.
Steps to resolve issues with X/Y axis movement during the homing test.
Troubleshooting for incorrect image scaling during LaserBot engraving or cutting.
Troubleshooting guide for when the LaserBot's serial port is not detected on mLaser via Mac.
Instructions to navigate mLaser when the initial interface is in Chinese.
Troubleshooting for mLaser interface appearing black on older computer systems.
Steps to resolve the 'application is damaged' error for mLaser on Mac.
Troubleshooting when the laser is on but cannot cut or engrave.
Troubleshooting for abnormal or non-operational stepper motors on the XY Plotter.
Steps to resolve issues with drawing incorrect or mirrored images with the XY Plotter.
Troubleshooting for abnormal behavior during the XY Plotter's homing test.
Addresses issues with the XY Plotter hitting boundaries during homing procedures.
