Chapter 1 - Basic info
60
Chapter 6 - Exposure Modes
shutter priority ae (tv)
Set the desired shutter speed and the camera selects the optimum aperture accordingly. Fast
shutter speed can be used to freeze motion, and slow shutter speed can be used to blur motion
on purpose.
The aperture value will blink when the subject is too dark or too bright for a correct exposure.
To obtain the correct aperture, adjust the shutter speed value until the aperture value stops
blinking and remains lit.
1. Turn the exposure mode setting dial
to “Tv” (shutter priority AE) position.
2. Turn the front or rear dial to set the
desired shutter speed.
To Next Page
Loading...
