Chapter 1 - Basic info
72
Chapter 6 - Exposure Modes
takinG photos with the mirror up
This function prevents mirror-caused vibrations which may blur the image in close-up photography,
when shutter speed is slow, when a telephoto lens is used, or when photographing a poster or
another picture.
When using the mirror up, electromagnetic cable release RE401 (optional) is recommended.
Using auto focus and auto exposure
Auto bracket exposures can be made when the auto bracketing mode is set before taking
photos with mirror up.
After the set time, mirror up photography will be cancelled.
The mirror will return to the original position if the lens is removed from the camera body.
1. Set the drive dial to “M.UP.”
2. Select “S” (single focus mode) by
turning the focus mode selector lever.
3. Turn the exposure mode-setting
dial to choose any of “P”, “Av”, or “Tv”
exposure mode.
4. Focus the subject, and determine
composition and exposure.
5. The mirror moves up when the
shutter button is fully pressed.
6. Press the shutter button again to
take pictures.
To Next Page
Loading...
