Mamiya RB67 - 21

• Handling the Roll Film Holder
R
Types of Roll Film Holder
There are three types of roll film holders .
For 6 x· 7cm ; 120 roll film
10
exposures
For 6 x 7cm ; 220 roll film
20 exposures
For 6 x 4.5cm ; 120 roll film
16 exposures
Although the outer cassette of 6 x 7 ro ll
film holders are the same, the film inserts
are
designed for one size film only. The
difference is indicated by the
film type index
marked on the
film insert
All types of holders are used the same
way ; however , special instruction for the
6 x 4.5
roll film holder are given on page 23.
R
13
14
Name of Operating Parts
R 1 Dark slide
R 2 Film type index (120 or 220)
R 3 Film advance le ver
R 4 Exposure counter
R 5 Warning signal window
Outer cassette
R 6 Memo clip
R 7 Back cover
R 8 Back cover lat ch
Film insert
R 9 Film wind-stop release lever
RIO Spool release pin (Ieft)
R 11 Film spool stud
R 12 Starting mark
R 13 Spool release pin (right)
R 14 Take -up spool stud
19