Mamiya RB67 - 07

Various film holders can be used by changing the back
adapter
In addition to the film holders for the Mamiya RB 67 , there
is a back adapter for attaching accessories of the Mamiya
Press or Mamiya Universal. Especially useful is the Polaroid ®
Land pack film holder , for the Mamiya Universal , which lets
you to see a finished picture on the spot - seconds later -
adding versatility to the camera for news photography where
speed is required, and for fashion photographs, scientific,
commercial, or industrial photography in prechecking com-
position and / or exposure setting. This camera is designed to
easily accommodate many accessories, offering unusual con·
venience and versatility.
Roll film holder for Mamiya RB 67 with safety device
The camera is equipped with a safety device to prevent re-
leasing the shutter while the dark slide is in the holder nor
does it permit the holder to be removed while the dark slide
is out.
Close-up photography by extending the camera bellows
As with the versatile Mamiya C Series cameras, you can make
interesting close-up photographs without using extension tubes
merely by extending the camera bellows up to its full 46 mm
extension. When using RB 67 auto - extension tubes , life-size ,
1 : 1 close-
up photography is possibl e.
Additional features
'i' Lenses are quickly and positively interchanged with the
RB 67 bayonet safety ring system.
* Since the focusing hood is easily interchangeable, you can
easily switch to an eye-Ievel finder or a magnifying hood
depending on your needs.
* In addition to the standard Fresnel lens focusing screen,
also
available are focusing screens with rangefinder spot,
microprism, cross hair, or checker grid. Select and change
to the screen to suit your specific purpose in a matter of
seconds.
* There are three types of roll film holders, one for 120 and one
for 220 roll films
(6 x 7 cm format). and one for 120 roll film
6 x 4.5 cm format.
A rapid film advance lever (
one-stroke film advance) permits
quick shooting.
* Dry plate or cut film can be used with the RB 67 double
cut film / plate holder.
* Independent mirror-release photography is also possible
when needed.
* A quick-shoe is available for mounting the camera quickly
on a tripod .
* Graflok back film holders made by Graflex can also be used.
5