Mamiya RB67 - Film Loading Completion and Preparation; Inserting Film into Cassette; Winding Film Advance Lever

7
10
R4
7. Put the insert into the cassette aligning the top side of
the insert with the
white dot of the cassette.
8. When the film insert is in position , close the back cover
and fully push in the back cover latch while pressing the
back cover.
9.
The clip (R 6) on the back cover can be used for hold-
ing the cover of a film box or a slip of paper to record infor-
mation.
10. Wind the film advance lever until it stops, the figure "1"
will
appear in the exposure counter (R 4), indicating the film'
is in
position ready for the first exposure .
NOTE: Wind the film advance lever in a slow steady manner
to avoid film winding problems.
21