1 - 8
INSTRUCTIONS
- The operator's manual must always be in good condition and in the place provided for it on the machine.
- The operator's manual and any plates or stickers which are no longer legible or are damaged, must be replaced immediately.
MAINTENANCE
- Maintenance or repairs other than those detailed ( MAINTENANCE) must be carried out by qualified personnel (consult
your dealer) and under the necessary safety conditions to maintain the health of the operator and any third party.
IMPORTANT
Your machine must be periodically inspected to ensure its continued compliance.
The frequency of this inspection is defined by the current legislation in force in the country in which the machine is used.
- Example for France "The manager in charge of the establishment using a machine must open and maintain a maintenance
log for each machine (Order of 2 March 2004) and undergo a general periodic inspection every 6 months (order of 1
March 2004)".
647866 M1 (A012021)
TMT ... K ST5 S1
To Next Page
Loading...
