23 - DRIVER'S SEAT
DESIGNED FOR MAXIMUM COMFORT, THIS SEAT CAN BE ADJUSTED AS FOLLOWS.
WEIGHT ADJUSTMENT
- Adjust the weight when the driver is sitting on the seat.
- Pull the weight adjustment lever1 fully out.
- Move the weight adjustment lever1 up to increase the weight or down to reduce it.
- There are ten possible positions between the min and max weights. Before each
run, return the lever to the central position. The max. or min. position is indicated
by a freely traveling lever.
- The driver's weight is correctly adjusted when the arrow 2 is in the center of the
indicator lamp.
- After completing the weight adjustment, fully lower the lever 1.
NOTE: To avoid health problems, it is recommended that the weight adjustment
should be checked and adjusted before starting the machine.
LONGITUDINAL ADJUSTMENT
IMPORTANT
Activate the lever with the ends of your fingers and not your whole hand to prevent the risk of crushing.
- Engage the locking lever 3 until you reach the desired position. Once blocked, the
seat can no longer be moved to another position.
DESCRIPTION (option)
MAINTENANCE
Dirt may adversely affect the correct operation of the seat. It should therefore be kept clean.
- First test the resistance of the coating on a hidden area with a textile cleaner.
NOTE: As an option, a protective transport case is available.
LUMBAR ADJUSTMENT
This increases the comfort of the seat and the driver’s freedom of movement.
- Turn the handle 4 to1 to adjust the height and depth of the lumbar support of the
upper part of the backrest.
- Turn the handle 4 to2 to adjust the height and depth of the lumbar support of the
lower part of the backrest.
BACKREST ANGLE ADJUSTMENT
IMPORTANT
If you do not support the backrest when making adjustments, it swings forward.
A moving backrest increases the risk of an accident!
- Support the backrest, pull the lever 5 and tilt the backrest to the desired position.
2 - 44
1
2
3
4
5
647866 M1 (A012021)
TMT ... K ST5 S1
To Next Page
Loading...
