Manitowoc GROVE GMK 4100 - Swing-Away Lattice GMK 4100-L

Driving with rigged crane
8.6 Tables with boom positions and axle loads
8 - 10 3 112 441 en Lattice extension operating instructions
GMK 4100/4100-L/5095
11.01.2008
8.6.2 Swing-away lattice GMK 4100-L
10 m (33 ft) swing-
away lattice
All of the axle loads in the following table apply with a 20 t hook block
(weight: 300 kg (660 lbs)) reeved on the lattice extension.
Counter-
weight
in t
(lbs)
Telescoping
Telescopic section
I-II-III-IV-V-VI
Main
boom
angle
Lattice
exten-
sion incli-
nation
Main
boom
position
1)
Maximum axle load
2)
in t
(x 1000 lbs)
Front Rear
6.3
(13 800)
0 - 0 - 0- 0 - 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
8.5
(18 700)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
10.7
(23 500)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
12.9
(28 400)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
15.1
(33 200)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
17.3
(38 100)
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Front
() ()
0 - 0 - 0- 0 - 0 0 to 45° 0 to 40° Rear
() ()
Values not available yet