Maintenance work on the superstructure
8.14 Other maintenance work
09.03.2018
Maintenance manual 3 302 746 en 8 - 85
GMK5200-1
8.14.5 Lubricating the connecting and socket pins
Grease, tools
–Brush.
Check the
following
On the superstructure, depending on the equipment, there are various con-
necting pins and socket pins such as:
– Locks and supports on the covers,
– Hinges on the crane cab's front and the rear window,
– Retaining rods for the rope discs at the head of the main boom.
• Check the pins for wear such as rust, deformation, broken clips, chains
and pin-type keepers.
• If the pins are damaged, have them replaced by Manitowoc Crane Care or
an authorised GROVE dealer or your qualified repair crew.
• Use only authentic replacement pins.
Greasing
• Clean the pins.
• Lubricate the pins with a brush.
Lubricating
grease
Designation to
DIN 51502
Specification
Classification
GROVE part no.
Grease KP - 1K - 50 DIN 51825 03233369
To Next Page
Loading...
