Manitowoc National Crane 800D User Manual

SAFETY INFORMATION 800D
1-42
Published 5-27-2018 Control # 039-06
NOTE: The following checklist includes all features that
can be found on National Cranes. Your crane may
not have some features.
Overload less than 25%
1
Sheaves,
Rope Guides
Inspect all for damage.
2
Collar-Wear
Pads, Pad
Retainers
Inspect for damage.
Overload from 25% to 49%
1
Sheaves,
Rope Guides
Inspect all for damage.
2
Collar-Wear
Pads, Pad
Retainers
Inspect all for damage.
3 Collar-welds Inspect all for damage.
4 Pinning Areas Inspect all for cracks.
5
Telescopic
Sections
Inspect for bent or twisted sections. Check the boom for
straightness.
6
Lift Cylinder
Head Area
Inspect for bends or cracked welds.
7
Turret-Base
Section
Inspect for cracked welds.
8 Jib Section Inspect for bent or twisted section. Check for straightness.
9 Welds Inspect for cracks.
10 Paint
Inspect for cracked paint which could indicate twisted,
stretched, or compressed members.
Fo
r
Reference
Only

Manitowoc National Crane 800D Specifications

General

Brand	Manitowoc
Model	National Crane 800D
Category	Construction Equipment
Language	English