SIDE SHIMMING OF BOOM SECTIONS 800D
7-18
Published 5-27-2018 Control # 039-06
MAINTENANCE & REPAIR
1. Refer to Hydraulic Schematic and System Description to gain a thorough understanding of the capacity alert system
before proceeding with any maintenance.
2. System adjustment must be checked every three months for accuracy. Refer to the preceding section on System
Adjustment.
3. Always be sure the boom is adequately supported and no hydraulic pressure remains in the lines before the pilot pressure
line fittings are loosened.
Fo
r
Reference
Only
To Next Page
Loading...
