78 Part Number 80-1230-9 10/10
SF400/SN450/SF600/SN650/SF900/SN950/SF1200/
SN1250
Removal of Parts for Cleaning or Sanitizing
1. Remove front, side and top panels.
2. Perform the cleaning and sanitizing procedures.
3. Run the ice machine in the freeze cycle for 5
minutes, then place the toggle switch in the OFF
position.
4. Disconnect the main power supply to the ice
machine.
5. Remove the ice chute cover.
A. Turn the two thumbscrews 1/4 turn
B. Lift to remove cover.
6. Turn ice wiper counterclockwise to remove.
To Next Page
Loading...
Need help?
General
