© 2019 Mannayan GmbH + Co KG Page 34 User Manual Trikombin
To use this feature, follow the instructions below:
1. Load the desired frequency program and modify all required settings.
2. For the Terminator feature, Wobble must be activated.
3. Tap the button “More...” (right side of screen) and tap “Terminator“. The dialogue
“Terminator” appears.
4. Select the desired number of cycles (the number of all Wobble cycles, which is
executed for each of the 10 Wobble times).
5. Choose if the currently selected Wobble time must be in- or decreased.
6. The device displays the total execution time, which results from the adjustments to
the settings.
7. Tap the button “Add”.
8. The program sequence has now been added to the Application Mode.
7.2.11 Foot Switch
A foot switch with three separate pedals is offered as an optional accessory. The foot switch
only works in the Testing Mode.
Connecting the Foot Switch
Turn off the device before connecting the foot switch. The socket is on the back side of the
device (labelled “Foot pedal”). The knurled screws of the plug should only be tightened very
slightly, to prevent damage to the plug or the socket.
Switch Functions
The functions are as follows:
• Left pedal: Turns the frequency generators on and off (identical to the “On” key of the
keypad.
• Central pedal: Depending on whether a numeric field is activated or not:
o Numeric field: lowers the numeric value
o Other field: selects the previous frequency program
• Right pedal: Depending on whether a numeric field is activated or not:
o Numeric field: increases the numeric value
o Other field: selects the next frequency program
When a numeric field is activated and the central or right foot switch is held down, the
keystrokes are automatically repeated.
To Next Page
Loading...
