Mannayan Trikombin - Acoustic Signals During Execution; Moving Programs in the List

© 2019 Mannayan GmbH + Co KG Page 38 User Manual Trikombin
After the execution of all frequency programs of the application list, an acoustic signal is
emitted and the message “Execution of the Applications completed“ appears. Please
confirm with “OK”.
7.3.7 Acoustic Signals
During the execution of the frequency programs acoustic signals are used under the
following circumstances:
• When the execution is started
• At the change to the next frequency program (without stop)
• At the change to the next frequency program (with stop)
• When the execution is completed.
The volume of the acoustic signals can be configured in the settings dialogue of the Start
Mode.
7.3.8 Moving a Frequency Program
1. Select the frequency program you would like to move in the application list.
2. Tap on the button “More...” (right hand side of screen). The corresponding menu
appears on the screen.
3. Tap on “Move...”. The dialogue “Move via Rotary Encoder” appears.
4. Use the rotary encoder in order to change the position of the entry.
5. Tap on the button “Done”.