31
5. Press Enter.
6. Wait for the connection to be established.
If the connection is successful, the content of your host
device is shown on the braille display.
The Mantis is now also available as an external keyboard to
type on the host device.
Connecting by Bluetooth
To pair a new device in Bluetooth:
1. Click Activate Bluetooth Pairing.
If Bluetooth is Off, it is automatically activated.
2. Select iOS, Windows or Mac.
3. Press Enter.
4. Read instructions on the display; press Enter to
dismiss the message.
The focus returns to the menu item.
5. From the host device, initiate the Bluetooth pairing.
6. Once the connection is complete, press the Previous
thumb key on the Mantis until you reach Bluetooth
Connection.
7. Press Enter or a cursor routing key.
The connected device appears in the list.
8. Press Enter or a cursor routing key.
9. Wait for the connection to be established.
If the connection is successful, the content of your host
device is shown on the braille display.
The Mantis is now also available as an external keyboard to
type on the host device.
To Next Page
Loading...
General