32
Navigating Between Connected Devices
When you have more than one device connected with the
Mantis, you can switch devices at any time.
To switch to another connected device:
1. Press the Home button to return to the Terminal menu.
2. Select USB or Bluetooth connection.
3. Select the connected device using the Previous and
Next thumb keys.
4. Press Enter or a cursor routing key.
Note: When a Bluetooth device is connected, an 8-dot
symbol is displayed after the device name. If the 8-dot
symbol is not visible, click on the device to establish the
connection.
If you have problems with a Bluetooth connection, you can
click on Reconnect devices. This turns Bluetooth Off and back
On and reconnects your devices. Use this option only if you
are not getting any braille when connected to a device.
Using the File Manager
The file manager allows you to browse, delete, copy, and
perform all the file operations you would expect from a PC file
manager.
To open the File Manager, press the Next thumb key until you
reach File Manager.
Alternatively, you can open the File Manager by pressing F in
the Main menu, then press Enter or a cursor routing key.
To Next Page
Loading...
General