Marantz MR2020 - Radio Tuner Operations

HSITSNA
(The figure indicates the procedure steps)
1.Turn power on
Press the power switch.
2.Select the FM or AM(MW,LW) input function
Press the FUNCTION button.
4
{(:0})
3.Select the frequency of the desired station
Press the + or — button.
STEREO
4.Adjust the volume | .
Press the volume up/down button for an optimum volume.
5.Turn power off
Press the power switch. The time of the day is displayed
when power is turned off.
When the switch is in the OFF position,
the apparatus is NOT disconnected
from the AC supply mains.
Notes
** In both FM and AM(MW,LW) bands, inter-station noise is pro-
duced from the speakers at frequencies without radio sta-
tions.
To prevent output of noise at a high volume, it is recommended
to decrease the volume before varying the tuning frequency.
% When power is turned off while the top panel is open, it closes
automatically.
13