•
Response A
•
Response B
•
Optimize grading for accuracy (ON)
13
Optimize grading for speed (OFF)
•
Reserved for special functions
•
Special functions
•
Transmission A
•
Transmission B
•
Disable power-down mode, battery operated
scales only
•
-
Special functions
14
1 When you have selected the command with the arrow keys,
press
PRINT to display the switches.
2 Switch
appears on the Config Display and the current
status (On/Off) is displayed above on the Weight Display.
3 Press PRINT again. The status indicator starts to flash and
can now be changed with the arrow keys.
4 Press PRINT to confirm the change.
5 Press the MENU key to return to the top of the Setup
Menu.
6 Press the MENU key a second time to return to Operating
Mode.
The
and
Commands (A/D Converters)
These commands display the direct value of the A/D converter readings
shown on the Weight Display.
1 Select the command with the arrow keys, and press
PRINT to submit.
2 Return to the Setup Menu by pressing the MENU key .
13
Due to local restrictions in some market areas, switches 5 through 7 may not be accessible by the user.
14
More information on the application switches is available in M1100 Packing & Grading Scale, Calibration
Instructions.
User’s Guide Advanced functions • 35
To Next Page
Loading...
