WARNING – Never operate the Mark 7® Autodrive while impaired.
WARNING – Never operate the Mark 7® Autodrive without using high quality brass and always use
sufficient lubrication on your brass while operating the Mark 7® Autodrive.
WARNING – The Mark 7® Autodrive is designed to help automate the process of loading and processing
of ammunition. Never operate the Mark 7® Autodrive at speeds higher than you have tested and are
comfortable with for the type of reloading or processing that you are undertaking. Run the Mark 7®
Autodrive at the slowest possible setting to create quality ammunition.
WARNING – Always wear protective eyewear to protect eyes from being injured. Flying debris may
result when using this equipment. Always wear protective clothing that covers arms, legs and neck to
protect from injury.
It is the responsibility of the user to ensure that appropriate protective clothing and equipment are used
to provide protection from those hazards to which personnel are exposed or could be exposed while
working with this product. Failure to do so could result in serious injury or death
To Next Page
Loading...
