Mark 7 Evolution User Manual

MARK 7® RELOADING EVOLUTION USER MANUAL VERSION 1.1, COPYRIGHT 2018
ALL RIGHTS RESERVED
1
Mark 7® Evolution Autodrive
User Manual v 1.1
Read this manual completely. Understand all safety and operating instructions. Failure to
comply with the warnings and instructions may result in serious injury, illness or death.

Mark 7 Evolution Specifications

General

Brand	Mark 7
Model	Evolution
Category	DC Drives
Language	English

Summary

Important Safety Instructions

Set-Up Procedures

Removal of Main Autodrive Assembly

Instructions for safely removing the Mark 7 Autodrive assembly from its packaging.

Mounting Evolution to Baseplate

Steps for securely attaching the Evolution press to the Autodrive baseplate using hardware.

Mounting Large Sprocket

Procedure for installing the large sprocket onto the link arm and securing it.

Belt installation

Guide on how to properly install and tension the drive belt.

Belt Guard installation

Instructions for correctly installing the belt guard using thumb screws.

Operating Instructions

Manually Operating the Evolution

Main Screen

Description of the primary tablet interface screen and its functions.

Before Each Session of Use

Key checks and inspections required before starting each reloading session.

Control Screen

Digital Clutch Setting

Guidance on adjusting the digital clutch torque for different reloading operations.

Monitors Screen

Sensors Screen

Setup Screen

PRIMER Sense™ Installation Instructions

SWAGE Sense® Installation Instructions

Adjusting SwageSense®

DecapSense™ Installation Instructions

Primer Orientation Sensor Instructions

Step 1: Removing Press Top End

Step 2: Installing Probe Retractor and Springs

Step 3: Installing the Primer Orientation Sensor Main Body

Step 4: Re-install the Press components

Step 5: Adjusting Optical Sensor to Desired Primer Depth

Step 6: Plug the Sensor into Port #2

Enabling Sensor

Software and Firmware Update Instructions