To Next PageTo Next Page
Need help?Do you have a question about the Mark 7 650 and is the answer not in the manual?
Identifies key components of the Mark 7® 650 Autodrive base unit.
Details the process of removing the standard handle from the Dillon 650 press.
Instructions for removing the knuckle and pin from the 650 ram.
Steps to detach the link arms from the Dillon 650 press.
Procedure for removing the lower pin from the left side link arm.
Guide for reattaching the link arms to the Dillon 650 press.
Steps to connect the Mark 7® crank to the 650 ram.
Instructions for mounting the Dillon 650 press onto the Mark 7® Autodrive mount.
Guide for fitting the protective shield around the crank mechanism.
Instructions for mounting the tablet and its holder to the machine.
Details on connecting and setting up console cables.
Procedure for manually operating the press before powering the Autodrive.
Installation of EMI filters for bullet feeder motors to reduce electrical noise.
Instructions for installing an RC filter for the Dillon case feeder to manage electrical noise.
Steps for installing the optical decapping sensor on the 650 press.
Guide for installing the optional PRIMERSense™ sensor.
Instructions for installing the optional BULLETSense® sensor.
Overview of the primary interface and available applications on the Mark 7® system.
Displays the user waiver and current software/firmware versions.
Essential pre-operation checks and maintenance for the reloading machine.
Interface for controlling the Autodrive's operational parameters and functions.
Screen for monitoring production counts and operational status.
Interface for enabling or disabling various sensor configurations.
Screen for configuring advanced operational settings like index speed and dwell.
Proper procedures for storing the Mark 7® Autodrive after use.
Verifying Dillon 650 functionality before operating the Autodrive.
Process to calibrate the Mark 7® Autodrive for optimal performance.
Procedure for checking and verifying ammunition quality after calibration.
How to adjust the digital clutch for torque control and safe operation.
Strategies and procedures for identifying and clearing jams in the Autodrive.
Overview of various configurable settings for the Autodrive.
Steps to resolve communication errors, often related to USB or interference.
General