™ Installation Instructions (optional sensor)
Box Contents and General Setup:
1. First review the box contents to make sure all parts are included:
a. Setup Insert
b. 650 BulletSense® Bracket Assembly
c. Mirror Bracket (Mirror Holder attached to Mirror Arm with 2X flat head screws)
d. 2X ¼-20 x 3” socket head cap screws for mounting to case feeder pole
e. Offloading bracket (modified for pistol calibers)
2. Check the software and firmware version installed on your machine and make sure it’s at
least the version listed below (or newer) before installing 650 BulletSense®. The latest
updates are available on the software updates page.
650 X: SW 00.01.13 FW 18
650 PRO: SW: 00.01.13 FW 26
To Next Page
Loading...
