46
Enter locomotive name: ex. Class 03.
Select an icon
that goes with
your locomotive.
Confi rm
selection.
Select icon.
With DIP Switches
Programmable locomotive Ö Page 47
78
3
enter a
decoder address.
Check the settings for the
decoder.
C
If all of the desired settings have
been done, then confi rm and save.
You can do other settings that infl uence the
locomotive‘s running characteristics when
controlled with the Central Station. The settings
can be done in the fi elds with “-“ or “+“. In our
example: acceleration and braking delay (these
settings affect the Central Station‘s controllers
and are not supported by this type of decoder).
The speedometer setting is for the display on the
Central Station‘s screen and has no infl uence on
the maximum speed of the locomotive.
If the locomotive is standing on the program-
ming track, you can read out the address for it.
or
3 x
To Next Page
Loading...
Need help?
General
