47
Programmable Locomotive:
Read or enter.
Confi rm, or if changes have been
made, transfer them to the locomotive.
You can do other settings that infl uence the locomotive‘s running
characteristics when controlled with the Central Station. The
settings can be done in the fi elds with “-“ or “+“. In our example:
acceleration and braking delay as well as the speedometer.
You can fi nd additional possible settings in the section “Confi guring a Locomotive“. Page 48
Selecting the decoder type.
Reading the existing
decoder address.
Confi rm.
The locomotive is now entered. It can be added
to or changed as shown starting on Page 48.
Place the locomotive on the
programming track!
oder
The locomotive has been
taken into the locomotive list.
To Next Page
Loading...
