41
Getting Set Up and Started
Selecting and Running a Locomotive
Selecting a Locomotive
You can start immediately if this locomotive or
a locomotive with address 3 belongs to your
motive power. Then continue as described
nearby under “Running a Locomotive“.
Selecting and Controlling Solenoid Accessories
2,048 addresses are avail-
able. These are arranged
numerically in ascending
order and can be activated
from a standard keyboard.
We recommend that you
check the settings for the
type of decoder before
using it. => Page 56/3-5.1
Selecting Controlling
Loading the Basic Confi guration for DCC
Running a Locomotive Function switch
Do Reset_DCC. After that the basic con-
fi guration for the Central Station is set to
DCC. This facilitates entering locomotives
and turnouts.
Or
You enter your locomotives as
described on page 47 under
“Programmable Locomotive“.
To Next Page
Loading...
