44
Locomotives and powered units can be entered, run, and managed with the Control.
Selecting and Running
The most frequently used
locomotives are available
for you to select in this list.
All of the locomotives taken by you
into the locomotive list are in this
list for you to select.
You can select from the last
30 locomotives used or you
can expand the selection.
Now you can run the locomotive you have
selected with the control knob or by typing
in the desired speed on the screen.
The functions can be activated by pressing
on the button or by typing in the symbol.
Locomotive with an mfx Decoder
Registering and/or taking into the
locomotive list.
Place your locomotive with an mfx decoder on the programming track. This can also be done while
the layout is in operation. The locomotive registers itself as shown in the following illustrations. The
registration can be done with an icon and locomotive name as well as without. Additional processing
as described starting on Page 48 will be necessary depending on the registration.
mfx locomotive recognized.
Data from the mfx
locomotive completely
read in.
Confi rm.
The mfx locomotive is ready to run and
can already be operated.
If it becomes necessary, we recom-
mend that the locomotive be added to
the locomotive list as shown starting
on Page 48.
To Next Page
Loading...
Need help?
General
