56 / - Instruction Manual
5.3.5 Use with electronic unit
Initial condition:
Handle switched off and radio enabled.
Access mode:
Click one of the two buttons ( blue).
Description:
Access to the measure connected to the electronic unit.
WARNING
To make a measurement it is necessary to have previously carried out
the pairing between the handle and the electronic unit.
Connected measure
i
INFORMATION
Using the Marposs electronic unit, it is possible to select 2 operating
modes of the handle:
Standard use mode
Free Run use mode
(for more details refer to the Instruction manual of the electronic unit).
To Next Page
Loading...
