HANG THE OPENER
Raise the Opener
Raise the opener onto a stepladder. Use extra spacers on top of the ladder if the ladder is not tall
enough.
Carefully raise the door to the fully open position. Be sure the door is clear from the rail or any other part
of the opener.
Place a 2x4 laid flat on the top section beneath the T-rail.
Carefully raise the door to the fully open position so that it is parallel to the floor.
Position the opener so that top of the opener head is level with the top of the opened door.
Sectional Door
laid flat
One-piece Jamb Door
To Next Page
Loading...