OPTIONAL PROGRAMMING
To SKYLINK
®
Internet Hub (046-0510-8; Sold separately)
1. Open SkylinkNet App and tap on “System Settings”.
2. Tap on “Set-up Wizard”.
3. Tap on “Add Device”.
4. Tap on “2-way Garage Door Opener”.
5. Name your garage door opener and location and tap on “Continue”.
6. On the wall console, press and hold the button for 5 seconds. then, press twice
until you see remote icon flashing.
7. On the APP, tap on “Learn Now”.
8. Tap on GDO icon to open/close the door. The icon shows the status of the door.
NOTE:
• Internet hub is not included.
To Next Page
Loading...