model no. 046-0266-0 | contact us 1-800-689-9928
OPERATION
Set Up Auto Closer
The opener has the option to program how long until the door closes automatically after it has been
opened.
1. Press and hold button for 5 seconds.
2. Press [Ç / È] button to set the auto-close
time.
3. Select “OFF ” = Disable
“03” = 3 mins
“10” = 10 mins
“30” = 30 mins
and press to confirm.
4. The wall console will return to standby
mode and display the current time.
To Open the Door Manually
In case of a power failure, or if the door becomes obstructed, pull the red trolley release handle to
disengage the opener from the door.
Flip the trolley release level up and raise or lower the door to re-engage the opener.
Use caution: if the door is open while disengaging, the door may drop.
To Next Page
Loading...
Need help?
General
