Mastervolt Masterlink BTM III User Manual

HISTORICAL DATA MENU
20 November 2006 / Masterlink BTM-III / EN
8.12 DEEPEST DISCHARGE BATTERY BANK 2
Shows the lowest voltage that was recorded. This value should never be below the
final discharge voltage as specified by the battery manufacturer. Not shown if
BATTERY NAME is set to “NOT USED” (see chapter 9.1). See chapter 10.12 if you
want to reset this value.
8.13 HIGHEST VOLTAGE BATTERY BANK 2
As with battery bank 1. See 8.11 Not shown if BATTERY NAME is set to “NOT
USED” (see chapter 9.1). See chapter 10.12 if you want to reset this value
8.14 DEEPEST DISCHARGE BATTERY BANK 3
As with battery bank 2. See 8.12. Not shown if BATTERY NAME is set to “NOT
USED” or “AUTO BACKLIGHT” (see chapter 9.1). See chapter 10.15 if you want to
reset this value.
8.15 HIGHEST VOLTAGE BATTERY BANK 3
As with battery bank 1. See 8.11 Not shown if BATTERY NAME is set to “NOT
USED” or “AUTO BACKLIGHT” (see chapter 9.1). See chapter 10.15 if you want to
reset this value.
8.16 EXIT LEVEL
Press Set shortly to return to the initial level of the main menu. (see chapter 6).
Also, if none of the buttons was touched for 60 seconds, the Masterlink BTM-III
returns to the main menu
BANK 2 LOWEST
XX.XV
Select
BANK 2 HIGHEST
XX.XV
Select
BANK 3 LOWEST
XX.XV
Select
BANK 3 HIGHEST
XX.XV
Select
EXIT LEVEL
PRESS SET
Select
Back to Time since
start-up
(chapter 8.1)

Mastervolt Masterlink BTM III Specifications

General

Brand	Mastervolt
Model	Masterlink BTM III
Category	Monitor
Language	English