Mastervolt Masterlink BTM III User Manual

ADDITIONAL INFORMATION
30 November 2006 / Masterlink BTM-III / EN
11.6 MASTERADJUST SOFTWARE
Figure 4
The Mastervolt Masterlink BTM-III can be configured
and monitored by means of MasterAdjust software.
Us of this software requires a PC-Link cable (art
21730100) or its galvanically isolated version (art
21730300). See ordering information.
The combination of the MasterAdjust software and
the PC-Link cable can be used to monitor and
configure different Mastervolt products, including the
Masterlink BTM III. It allows you to read the
measured data from your Masterlink BTM-III battery
monitor and store these data to a file. With this file
you can analyze the performance of your DC system
and your batteries in particular.
The Data Control software can be downloaded from
the Mastervolt website at www.mastervolt.com
See the user manual of the Data Control Software
for detailed information
11.7 PEUKERT CALCULATOR
Figure 5
This handy software allows you to determine the
Peukert coefficient of your battery set. Simply enter
the details of two different discharging processes
and the programme will immediately calculate both
the Peukert coefficient and the C10 and C20
capacity
This software can be downloaded from the
Mastervolt website at www.mastervolt.com

Mastervolt Masterlink BTM III Specifications

General

Brand	Mastervolt
Model	Masterlink BTM III
Category	Monitor
Language	English